26
SL AX StVZO
Bluetooth remote control
For establishing a connection, the receiving mode of the lamp has to be activated.
After connecting the lamphead to the battery, the lamphead is in receiving mode for 15 seconds.
During this time, press the remote control’s big button for about 5 seconds, until the remote confirms by
lighting up blue. Release the button immediately.
By default, your lamp has already been connected to the transmitter.
Connecting the transmitter to the light:
Engli
sh
27
SL AX StVZO
Bluetooth remote control
Low button cell:
With decreasing voltage, the remote control LEDs will shine less bright. Also cold temperature does reduce
the battery voltage.
Transmitter battery change:
To change the transmitter button cell a T5 star drive key is needed.
Insert the new CR 2032 button cell as shown and close
the transmitter again.
Tighten the screws until the sealing is visibly squeezed.
T5 star drive key: (Art.No. 137)
As shown in the picture below, the bluetooth remote control needs to be mounted in the field of view next to
the grip, at a maximum of 25 cm from the center of the handlebar.
Summary of Contents for SL AX
Page 1: ...SL ax 3800 lumens ...
