20
SL AX StVZO
Assembly Instructions
Position the SL AX centric at the handlebar. Now close the bracket of the quickrelease so the SL is moun-
ted tight in its position.
Important:
The beam must be at least inclined so that its center is only half as high as 5 m away from
the headlamp. For this, it may be necessary to adjust the inclination of the mounts.
Height of the light cone after
5m: Half height as outlet
5m:
1/2
For proper setup screw on the lever of
the quick release mount.
The quick release can be mounted on both sides,
depending on the stem width.
Engli
sh
21
SL AX StVZO
Battery mounting
Battery mounting:
Your battery is supplied with a velcro strap, coated with an anti-slip material to ensure a secure mount.
Use the strap which most closely matches your tube size.
Battery type:
The battery is mounted with a velcro as shown here. They also come with a capacity indictaor.
When mounting the quick release, note the position of the O-rings. One O-ring should be between
the holder and the lamphead and the other one between the holder and the screw.
Summary of Contents for SL AX
Page 1: ...SL ax 3800 lumens ...
