Lupilu LBFW 150 A1, Operating Instructions Manual

Page: 34 / 130

GB │ IE
│
31 ■ LBFW 150 A1
Disinfect
This function is intended for disinfecting baby bottles and their accessories.
It should be used for no more than 20 minutes at a time.
NOTE
► Only use the appliance to disinfect baby bottles and other objects that
are heat proof, i.e. neither deform nor release harmful substances at a
temperature of 100°C.
► Baby bottles and other objects must be cleaned completely before disin-
fecting.
► Place bottles into the basket next to each other; do not pile them on top
of each other.
► Always remove the disinfected baby bottles and objects with clean hands
or sterile gloves to avoid contaminating them again.
Ƈ
Pour about 60 ml of tap water into the appliance base .
CAUTION – MATERIAL DAMAGE!
► Do not fill the appliance base with mineral water, as the minerals will
deposit sediment inside the appliance.
► Ensure that the water level never exceeds the MAX marking .
Ƈ To disinfect baby bottles, place them into the basket upside down.
Ƈ
To disinfect objects, place them into the basket and attach the lid to
the appliance basis . When replacing the lid , make sure the notch is
located above the handle of the basket .
Ƈ
Turn the function selector to the symbol (disinfect). The function
indicator will light up red and the appliance will heat the water up to
approx. 100°C.
WARNING
Risk of scalding!
► The steam escaping the steam outlets and the condensation on the
inside of the lid are hot. Avoid contact with this steam or water!
Ƈ
Switch the appliance off after 20 minutes by moving the function selector
to the position
O
.
Ƈ Allow the appliance to cool down before removing the disinfected baby
bottles or other objects.