background image

2

Dear summerhouse owner,

impossible to completely prevent some degree of warping, the

formation of resin and cracks, especially on the outside surfaces

and is not actually a defect in the quality

Incidentally:

We wish you every success and lots of fun with the construction of your log cabin . . .
Now you can get started...

Thank you for choosing a Luoman log cabin! Your cabin was manufactured with the greatest care and
expertise from good quality, well-dried, fine-grained spruce/pine at our modern plant in Finland.

The material we use is purely natural, and being solid wood is vigorous and active. Despite technical
drying methods it is, nonetheless,

The varying knot formations are

also typical of spruce/pine. These variations are all part of the beauty of wood.

Any rough edges and unevenness caused by the planer etc. on the back of the profiled planks and
floorboards is due to production techniques and

The timber we use (which is, of course, from sustainable forests) is absolutely untreated, except for the

to avoid by applying a coat of stain(blue-stain inhibitor is recommended) or

paint

please, take notice of the recommendations of the varnish or paint manufacturer. It is not

advisable to paint the wall timbers before assembling them

this is best done when the cabin has been

erected and the weather is fine. However, if you wish to paint odd parts in different colours, this should
be done before the cabin is assembled.

adequate ventilation and avoiding waterlogging are still the best ways of protecting wood

against rot.

.

.

Teknogrund treated parts. That means that the untreated wood will turn greyish over the years, something
which you might choose

Please check the content of the package before you start building your cabin and contact your

dealer if something is missing or can not be used for the purpose. Claims are not accepted after the
product has been assembled.

®

Note!

Please NOTE: Luoman Oy reserves all the rights to the photos, drawings, building instructions and other technical
information. Using or forwarding them to competitive purposes is forbidden and will be followed by legal
responsibility for the consequences.

Luoman Puutuote Oy has a Chain-of-Custody system, which is certified by DNV Certification Oy/Ab (www.dnv.com,
certificate 2149-2005-SMS-HEL-DNV). At www.luoman.fi we present the share of certified wood raw material in
your cabin. Our company is a holder of the PEFC logo license PEFC/02-31-82.

Lillevilla 100 C-3 English 220109

Dear Customer,
in a case of reclamation, please inform your dealer about the specific guarantee number of your
cabin. You can find this number on the package and on the front page of this instruction manual.
Unfortunately, without this guarantee number we cannot handle your reclamation!

Summary of Contents for Lillevilla 100 C-3















Reviews: