background image

BUILDING INSTRUCTIONS 

Foreword 

Dear customer,

Thank you for choosing this light log product. Please read the instruction manual carefully in 

full before beginning the installation, and keep the instructions for further reference. Drawings 

of wall constructions and part lists are specific to each model’s own separate instructions. 

Warranty terms for this product: 

The warranty is void if: 

– Assembly instructions are not followed by customer.
– Changes have been made to the parts by customer.
– The package has not been stored properly after delivery to customer.
– The assembled product has not immediately been properly taken care of by painting or other

preservative product.

The foundation is not made properly, or according to our instructions.

The warranty is valid if:

– A part has a manufacturing defect
– A part is not fit for its intended use.
– A part does not meet the information given prior  to purchase.
– A part lasts for a shorter time than can be assumed.

Please check with your local building authorities if planning permission is required before 

beginning construction. 

Receiving and storing the goods 

Machined logs and other parts have been packed into protective wrapping. If the item will not 

be constructed immediately, it should be kept indoors or otherwise well-protected until 

assembly. The package should be kept away from the ground in order to avoid absorbing 

moisture and be stored on a level base. 

Transport defects and missing parts must be recorded on the waybill. The delivery is checked 

against the waybill when unloading. At the same time, possible transport defects are identified. 

Defects and missing parts are recorded on the waybill and immediately reported to the 

provider. 

For package and transport technical reasons, logs and other timber are placed in the package 

so that they form reasonably sized bundles. Therefore, the logs may not be packaged in the 

assembly order.  

If possible, store the windows and doors indoors. 

Please check the contents in full with the help of the part list and contact your retailer 

immediately if something is missing or defective. 

Please sort the parts near the planned building area leaving enough space for working. 

1.

Check the content of the packages

ID 7889, Versio 2, Pvm 12/1/2020, Luoman 724

Summary of Contents for 724































Reviews: