117
ANTENNA
Signal
Symptom
Action
Very Poor
No picture or sound, TV freezing, severe
Check the amplifier gain is set to maximum (rotate
pixilation, break up and picutre drop out
clockwise). Check antenna alignment which must
be directed at the transmitter. Ensure the
Poor
Moderate pixilation and sound distortion
antennas polarity is correct, whether horizontal or
vertical. Bypass the amplifier by following "Short
Medium
Minor pixilation will not receive all channels
Hook-Up Test 1"
Good
Stable picture, good sound quality will
N/A
receive all channels
Strong
Possible pixilation, picture break up and
Reduce the amplifier gain (rotate anti-clockwise).
drop out.
Rotate antenna AWAY from the transmitter.
Very Strong
No picture or sound, TV freezing, severe
Rotate antenna AWAY from transmitter.
pixilation, break up and picture drop out.
Switch 'OFF' the amplifier and turn the gain control
to maximum (rotate clockwise).
After performing any of the 'Actions' above you must re-tune your TV
Guarantee
The Status Antenna has a return to base guarantee against defective parts and workmanship for two
years or a period determined by the vehicle manufacturer. This does not include any malfunction
resulting from improper use, incorrect installation, accidental or malicious damage. To support your
guarantee claim a dated Proof of Purchase will be required.
This does not affect your statutory rights. Any queries concerning warranty please contact ourselves.
Fault Finding
The following are some of the key areas we
suggest you check which generally solve the
most common problems encountered with the
operation of the Status antenna.
Coaxial Connections
It is critical that all connections in the system
are fitted correctly and only quality plugs have
been used.
Coaxial Cable
Sharp bends, kinks and hot surfaces can easily
damage coaxial cable and should be avoided.
Coaxial cable, if placed in close proximity to
electrical cables, transformers or other pieces
of electrical equipment, may pick up electrical
interference causing picture quality to
deteriorate, especially in poor reception areas.
Excess cable should be removed and NOT
coiled as this may cause picture distortion. An
inspection of the routing of the cable is highly
recommended to ensure all is correct.
Gain Control
In normal use the button should be rotated
clockwise for maximum. In strong signal areas
the amplification may need to be reduced. To
reduce amplification rotate the button anti-
clockwise until picture quality improves. The
button rotates through 270 degrees from MAX
to MIN
Summary of Contents for 2016 Ariva
