Lunar Caravans 2016 Ariva, Owner'S Handbook Manual, Page: 13 / 156

13
PREPARING FOR THE ROAD
Fig. 5
OPERATING INSTRUCTIONS FOR
AKS 3004 STABILISER
Checking the efficiency of the left/right
friction pads
1. Check that the stabiliser is correctly
coupled by ensuring the coupling handle
is fully down and the red indicator button
is in the raised position.
2. Push the stabiliser handle down until
resistance is felt (ie. the friction pads are
in contact with the ball but not yet under
pressure (Fig 6/Item 1).
3. Check the position of the arrowhead on
the arm of the stabiliser. If it lines up with
the two green lines then the friction pads
are still as new (Fig 6/A).
4. If the arrowhead lines up with the two red
lines then the friction pads are worn and
should be replaced immediately (Fig 6/
B).
Note: When the stabiliser handle is correctly
applied, the arrowhead should line up with
the black line marked 2 (Fig 6/C).
Note: The friction pads do not require any
form of lubrication and should be cleaned
with a fine emery paper prior to every
journey. It is not necessary to adjust the
friction pads.
AKS 3004 Friction Pads