Luna LB40, Manual

Page: 5 / 149

5
Issue 1 Original Version March 2016
4. INFORMATION PLATE SYMBOLS
1. Refer to the user manual for operational and safety issues with regard to this machine.
2. Dispose of the machine and electrical components correctly.
3. Eye protection must be worn when operating the machine.
4. Ear defenders must be worn when operating the machine.
5. SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel = 40 mm dia. x 50 mm deep
Arbor bore = 19.05 mm (3/4") dia.
Motor Unit
(Nominal values) LB40 230V 50-60Hz 1100W
Electro Magnet LB40 230V 50-60Hz 45W
Total ( motor) 1145 W
Overall
Dimensions Height (maximum extended) 510 mm
Width (including Hand Wheel) 180 mm
Length Overall (including Guard) 265 mm
Magnet Footprint 165 mm x 80 mm
Nett Weight 14.6 kg
Stroke 85 mm
No Load speed All voltages 270-610 rpm
Tractive Force of Magnet at 20º C (25mm min. plate thickness).
The use on any material less than 25mm thick will progressively reduce the magnetic performance.
If possible, substitute material should be positioned under the magnet and work piece to equate to a
suitable material thickness. If this is not possible an alternative secure method of restraining the ma-
chine MUST be used. Failure to do so may result in personal injury. 8000N
Maximum hand/arm vibration magnitude (measured at handle during operation in accordance with ISO5349,
using a 22 mm dia cutter through a 13 mm mild steel plate). 2.892 m/s²
Estimate of vibration exposure. Operation 30 holes @ 1 minute/hole. 0.13 m/s² A(8)
Average noise level during cutting at operator’s ear position. LPA Max. 88.4 dB(A)
LWA Max. 101.4dB(A)
Ear and eye defenders must be worn when operating this machine. Wear gloves to protect hands when operating
the machine.
These tools are UK designed and manufactured with globally sourced components and conform with the require-
ments of EEC Document HD.400.1 and BS.2769/84
Suitable only for a single phase 50–60Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
UK