12
13
base can be removed and the unit be secured perma-
nently to the bench by means of four wood screws
and washers.
4. Never leave it running unattended. Always switch
it off between operation or when inserting the work-
piece. Before attempting to adjust the work-table or
change the grinding face, always ensure that the elec-
tricity supply is disconnected.
5. After switching off the motor allow the grinder to
free wheel to a stop. Never attempt to stop it by bra-
king rotation with pressure applied to the disc.
6. Your universal grinder is designed so that cuts ex-
tracted away from the work surface. And therefore re-
quires only occasional cleaning. For this a paint brush
or vacuum is recommended. Otherwise, the unit is
completely maintenance free and requires no further
attention or inspection.
Summary of Contents for 20009-0207
