8
-
Cancel: Exit to main menu
-
OK: Returns monocular to factory settings
VERSION:
-
Displays current software version installed in your device
ELECTRONIC IMAGE MAGNIFICATION ZOOM:
Your unit is also equipped with electronic zoom function, which allows you to
change image magnification from 6x to 36x. To increase the image magnification
rotate the Menu Controller (9) to the right (clockwise) and look into the ocular –
you will see the image magnification increase with each rotation click by 3x. See
below the magnification chart according to each rotation:
6.0x – 9.0x – 12.0x – 15.0x – 18.0x – 21.0x – 24.0x – 27.0x – 30.0x – 33.0x – 36.0x
You can observe the current magnification level on the bottom left corner of the
image display once you start rotating the Controller. To decrease the image
magnification, rotate the Controller to the left (counter-clockwise) and image
magnification will decrease by 3x with each rotation. Factory default setting is 6x
NOTE: During any image magnification adjustments, please avoid pressing
onto the Controller, as this may activate the device main menu.
SHORTCUTS (MULTIPLE BUTTON FUNCTIONS):
The three top buttons can be used to skip the main menu navigation and provide
quick shortcuts to the most popular functions:
POWER & IR BUTTON (4):
a)
Initial short-press – turns the power ON
b)
When power is ON, single short press activates 1
st
power level of IR illuminator. There are 3 IR power
levels – each consecutive short-press increases the
power by one level. 4
th
short-press turns the IR
illuminator OFF
c)
When power is ON, long-press shuts the power OFF
CAMERA BUTTON (3)
a)
Factory default setting is VIDEO. Short-press
activates video recording
b)
Long-press activates Mode selection. Once
activated each single long-press selects between
VIDEO / PHOTO / PLAYBACK modes
c)
Once selection is changed single short-press on
this button will either activate Video recording,
Still Image capture or Playback function
IMAGE BUTTON (2)
