14
5.
Once connected make sure your phone is allowed to stay connected to
this Wi-Fi signal even though there is no internet available. This will
prevent automatic disconnect by your phone.
6.
Now open the app and it will display the device name below the orange
cam symbol – simply touch the cam symbol and app will connect to the
device.
7.
Follow on screen menu on your smart device to utilize the available
features of the app. NOTE: during Wi-Fi streaming the ZOOM function is
disabled and cannot be utilized!
8.
During Wi-Fi streaming single press onto the Super Controller activates
either Video or Photo capture, depending on the selected mode. Repeat
press deactivates video.
9.
If the App shuts down during normal use, please re-start it, or re-install it
on your mobile device if it happens more than twice.
RE-FORMATTING 64GB & 128GB MICRO-SD CARDS TO FAT32
FORMAT:
Any micro-SD card above 32GB needs to be re-formatted from EXFAT format to
FAT32 format, which is the format of the night vision monocular (and many other
consumer electronics). Please note that FAT32 is the most widely used format and
is also considered the most reliable format.
In order to re-format the card you must run it through a 3
rd
party provider. We
suggest using Disk Partition. While nearly all of the providers would want you to
buy their upgraded versions, you can just download their basic free version and it
would be sufficient to re-format the card. Disk Partition seems to be the most
simple and hassle-free provider we could find:
https://www.disk-partition.com/download.html
Download the “Standard Free” version and follow all the download
instructions.
Once downloaded, open the program and insert the micro-SD card into the
computer.
Highlight the correct disc by single-click and then choose on the bottom
left side of the menu to “Format Partition” (alternatively right-click on the
highlighted disc and choose the same function). A pop-up window will
appear. You can label your partition (such as “Luna Optics Monocular” or
any other name you desire (it’s optional) and then make sure to select
“FAT32” as the File System. Then click “OK”.
Once the format is finished, click on “Apply” located in the most upper left
corner. You must select “Apply” otherwise the formatting is not finished.
You card is now formatted, but before you can use your 64/128GB card in
our digital night vision product you must also format the card inside the
