background image

Video Output (5) and then connect to the TV/Recorder. .  NOTE – if you live 
outside of the USA, you may need to switch the Video Output from NTSC to 
PAL by accessing the menu (Press IR Button for 2 seconds and when Menu 
appears select Video Format with Image button (11) and activate it with IR 
button (13). Switch between NTSC and PAL formats by pressing the Image 
Button and confirm your setting by pressing IR or REC button (depending on 
the software version). 

 

  TROUBLESHOOTING: 

1.

 

Unit does not turn on and the light indicator is off: 

a)

 

please check if the batteries are inserted correctly 

b)

 

please make sure the batteries are fresh 

2.

 

The light indicator is working, but you cannot see the image: 

a)

 

you may be turning the unit on in a dark area with the lens 
cover still on the unit 

b)

 

You may need to turn on the infrared light 

3.

 

Unable to obtain sharp and clear image: 

a)

 

you may need to repeat the process of rotating the ocular and 
objective lens several times until you get a good feel of it 

b)

 

You may be viewing an object that it too close – the minimum 
focusing distance is approximately 50cm or 1.6ft 

4.

 

I switch from active image to photo/video review and the unit shuts off: 

a)

 

You are pressing the Power button too long. You must only 
press the Power button once and immediately release it. 

5.

 

Image freezes during operation or during initial turn on: 

a)

 

Open at least one battery compartment and then re-activate 
the unit. 

6.

 

I’m trying to turn the IR illuminator on and instead I see the date/time 
menu: 

a)

 

You are holding the IR button for more than 1 sec.  In order to 
turn the IR illuminator on, you must press the IR button once 
and immediately release it. 

TECHNICAL SPECIFICATIONS: 
CCD/CMOS Resolution / Sensitivity: __________ 1920x1080 / 0.002lux (night) 
Still Image resolution __________________________________ 2.1MP JPEG 
Video resolution (signal) __________________Full-HD 1080p AVI (NTSC / PAL) 
Image Magnification _______________________________________6x-30x 
Focusing Distance__________________________________ 50cm (1.6ft) - ∞ 
Viewing Distance (IR complete darkness) __________________ 250m (820ft) 
Field Of View______________________________________________ 6°x4° 
Memory ________________________________ Micro SD card (up to 128GB) 
Power______________________________________2 x 3V Lithium (CR123) 
Operating Time __________________________________________2.5-3hrs 
Dimensions___________________170mm x 80mm x 63mm (6.7”x3.1”x2.5”) 
Weight_____________________________________________ 400g (14 oz) 
Warranty___________________________________________________1yr 

Summary of Contents for LN-DM60-HD









Reviews: