lumishore 60-0366 Setup And User Manual Download

Page: 7 / 13

www.Lumishore.com

Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]

www.Lumishore.com

Note: Zones that are off are not

automatically included in the scene

Tick the zone to include it in its “Off” state.

Then save the scene.

The new scene will appear on the scenes

home page.

Editing a lighting scene…

To edit a lighting scene, long press (>3sec) the scenes tab from the home page. In the example below zone 5 will be

edited in the scene to turn on in “warm white”.

The updated color and intensity will

display on the tab – press save to

finish.

Change the color and intensity for

this zone, press the back button when

done.

Press the zone to edit

Long press (>3sec) the scene tab

Summary of Contents for 60-0366














Search results

Summary of Contents for 60-0366

Reviews:

Related manuals for 60-0366

Brands by name

Popular brands

lumishore 60-0366, Setup And User Manual

Search results

Summary of Contents for 60-0366

Reviews:

Related manuals for 60-0366

Brands by name

Popular brands