lumishore 60-0366 Setup And User Manual Download Page 12

Page: 12 / 13

www.Lumishore.com

Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]

Update OVER THE AIR (OTA)...

The OTA feature allows the system to update using a connected laptop or PC. The system can be updated without the

loss of settings and user data. Note: Lumishore recommends using a laptop or PC for this feature with power saving

features and screen saver turned off.

To update the firmware using a laptop or PC, first contact Lumishore for the latest firmware and save this file to the

desktop.

Next, follow the instructions

Control from Smart Device or Web Browser

to connect your device to the Lumi-Link

Command Center via Wi-Fi.

Using the connected device navigate to the “System Maintenance” menu and select “Firmware Update”

www.Lumishore.com

Summary of Contents for 60-0366














Search results

Summary of Contents for 60-0366

Reviews:

Brands by name

Popular brands

lumishore 60-0366, Setup And User Manual

Search results

Summary of Contents for 60-0366

Reviews:

Brands by name

Popular brands