www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]
1
45-0138 - Rev 2
Lumi-Link Command Center - Setup and User Guide
First Time use…
When first installed the system needs to be setup. Setup is a quick and easy process and is only performed upon initial
installation or after a system SD card change.
Setup discovers lights that are attached to the network and allows the user to select between a Single Zone or Multi
Zone mode display.
Underwater lights
can be setup as a “
Single Zone”
or as a
“Multi Zone”
For
underwater and above water
installations choose
Multi Zone mode
as per the following examples.
Configuration Examples…
* FOR FIRMWARE VERSION 1.9 AND ABOVE *
Example 1
; Single Zone – UW lights only
Example 2
; Multi Zone – UW lights,
Starboard, Port, Transom.
Example 3; Multi Zone – UW lights &
Lumishore LUX (e.g, downlights, strip
lights and courtesy lights).
