1
0
How to Install Your Canopy Housing
Figure 1
NOTE:
This step is applicable after the neccessary
wiring is completed.
1.
Assemble
the
canopy by rotating
it to aligned the
"L
-shaped
"
hole
s from the
canopy over
the
two
(2)
screw
s o
n
the
hanger bracket, taking
care not to
pinch the wires. Tighten
the
two
(2)
screw
s
.
Fully
assemble and tighten
the remaining
two
(2)
screws
previously removed, into the round holes on each
side of the canopy
(Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
Hanger
assembly
Loosen the
screw
Ceiling
Canopy
screw
