LumiraDx Instrument User Manual Download Page 58

Page: 58 / 76

LumiraDx will contact administrators when software updates are available. Software

updates will be provided on USB memory sticks and should be installed on each

instrument by the administrator. Installing the latest updates will help ensure that the

LumiraDx instrument operates with optimum performance and that the latest features

are available. This section describes the steps required to complete the software update.

6 Software Updates

2. Power on

Power on the Instrument by pressing the power

button at the rear of the Instrument.

A progress bar on the Instrument display will

indicate installation.

Once installation is completed the Instrument

will power on as usual.

Remove the USB memory stick from the

Instrument once completed.

1. Insert USB Memory Stick whilst the

Instrument is switched off

Remove the USB Memory Stick from its

packaging. Looking at the rear of the

Instrument, insert into the right side USB port,

nearest the power button.

56 - Software Updates

Summary of Contents for Instrument













































































Search results

Summary of Contents for Instrument

Reviews:

Related manuals for Instrument

Brands by name

Popular brands

LumiraDx Instrument, User Manual

Search results

Summary of Contents for Instrument

Reviews:

Related manuals for Instrument

Brands by name

Popular brands