Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.0
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Models TAV-XX-XX
1.1
Lay the fixtures on the floor. Then slide each fixture housing into the connecting hub then secure using the provided screws.
2
canopy detail
4-3/8"
4-3/8"
7/8"
standoff
cap
Note:
Prior to installation all wires must be present in junction box.
Junction box must be located within 96” from the power cable
on the fixture.
Reference page 12 for wiring diagrams.
Note:
More than one person is recommended for this installation.
2.1
A canopy will be needed for every power feed cable.
Measure the distance from standoff hub to the other hub. Then mark this location to the
ceiling. Use canopy detail to slighting off center standoff hub.
Tavan
-
Tavan L, T or X connector installation
1
screw
measure
fixture
housing 3
fixture
housing 4
fixture
housing 1
fixture
housing 2
X-connector hub
standoff hub
Page 9 of 12
fixture
housing 4
fixture
housing 1
fixture
housing 2
fixture
housing 3
connecting
hub
1.1
1.1
