Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.0
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Models TAV-XX-XX
aircraft cable
standoff
hub tab
6.3
6.2
aircraft cable
cable stopper
threaded post
6
6.1
Untangle each aircraft cable and insert into the threaded post
until the cable stopper.
6.2
Push on the standoff hub tab and feed the aircraft cable into the
standoff hub until necessary. Release tab to secure in place.
For
the aircraft cable closest to the coaxial cable slide through the
o-rings on the coaxial cable first.
6.1
threaded post
5.1
Insert the wire nut connections into the junction box & align the
crossbar to the junction box holes and secure using the provided
two #8-32 screw.
5.2
Slide the backplate up to the crossbar and secure by hand
tightening the thumb nut into the crossbar.
#8-32 screw
crossbar
backplate
junction box
5.1
5
5.2
7.1
Tighten each threaded post into a cap, one will be on the
backplate and other(s) on the ceiling. If fixture not leveled,
adjustments can be made by pushing on the standoff hub tab.
Then either feed more cable into the standoff hub or pull out
cable from the standoff hub and release to secure.
7.2
Cut off any extra aircraft cable from the standoff hub hole.
7
standoff
hub tab
threaded post
aircraft
cable
cap
7.1
7.2
7.2
8
8.1
If necessary make any final adjustments to the cables use the
o-rings for a cleaner look.
8.1
o-ring
aircraft cable
coaxial cable
Page 3 of 12
Tavan
-
Tavan stand-alone installation
o-ring
