Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.0
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
1.1
Lay the fixtures on the floor, then slide each fixture housing to each other secure using the provided screws.
1
fixture
fixture w/joiner
joiner
screw
1.1
2
canopy detail
4-3/8"
4-3/8"
7/8"
standoff
cap
measure
measure
2.1
Note:
Prior to installation all wires must be present in junction box.
Junction box must be located within 96” from the power cable
on the fixture.
Reference page 12 for wiring diagrams.
Note:
More than one person is recommended for this installation.
2.1
A canopy will be needed for every power feed cable.
Measure the distance from one standoff hub to the other hub. Then mark this location to the
ceiling. Use canopy detail to slighting off center standoff hub.
fixture
fixture
power cable
Tavan
-
Tavan joiner installation
Models TAV-XX-XX
Page 5 of 12
fixture w/joiner
Top View
fixture
