Bosca
-
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Models BOS-XX-S-XX
Page 3 of 6
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR DAMP LOCATIONS
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Note:
Prior to installation all 24VDC wires must be present
near fixture. Refer to the power supply installation instruction
for additional information.
Note:
More than one person is recommended for this
installation.
2
2.1
Determine the location of the fixture. Then secure the fixture to the surface
using the provided mounting screws.
3
Option 2-
Feed wire whip to the power supply.
OR
Option 1-
Secure female quick connect to
male quick connect. Feed male quick connect
wire through conduit to power supply.
3.1
Follow one of the two options to connect the
fixture to the power supply.
female quick
connect
male quick
connect
to power supply
wires from
fixture
fixture
fixture
screw
4.1
C24 VDC red wire from
the fixture to the power 24
VDC red wire with a wire nut.
Connect -24VDC black wire from the
fixture to power supply -24VDC
black wire with a wire nut.
4
class II
power
supply
24 VDC
120 VAC
+2
4 VDC RED
-2
4 VDC BL
A
CK
-2
4 VDC BL
A
CK
+2
4 VDC RED
4.1
to fixture
wires from
fixture
E472444
5. SURFACE MOUNT ONLY
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. INHERENTLY PROTECTED
2.1
2.1
1
1.1
Install brackets 4” from each end and 30” in between the fixtures. Line up each mounting bracket to the
back on the fixture & insert the edge of the clip into the fixture. Then rotate and push clip in until you feel
a click. Followed by tightening the set screw using the Allen wrench (provided). Repeat for the remaining
brackets.
1.1
1.1
1.1
completely installed
fixture
mounting
bracket
set screw
mounting bracket
Screw-in installation
REV0.5 07272018
