Luminex LumiSplit 2.10, User Manual, Page: 7 / 18

After the device has been powered-up correctly, you can start
changing the different operating modes and port features through
the front panel or via RDM. To change the settings by using the
front panel, follow these instructions.
Through the front panel, you can connect 2 inputs (A and B) and
10 outputs (1 to 10). Each output has a LED indicator and a push
button. These are used to change and display the port status. The
input buttons are used to change the operating mode of the split-
ter.
2.1 Zone selection per port
By default, every output is linked to input / zone A. To toggle be-
tween zone A and B,
shortly press the A / B button
next to the
specific output. The output LED indicator colour will change ac-
cordingly. Press the button again to toggle between A and B once
more.
2.2 RDM Filtering
The LumiSplit supports RDM filtering to prevent lighting fixtures
from being flooded by undesired RDM packets. You can enable or
disable RDM filtering per input (zone A / B) or per output.
RDM FILTERING PER INPUT:
Press the input button shortly
to enable or disable RDM filtering
per zone (A / B). The input LED indicator colour will change,
together with all associated output LED indicators.
RDM FILTERING PER OUTPUT:
Press the input button together with the desired output
button (shortly)
to enable or disable RDM filtering on that output.
The output LED indicator colour will change accordingly.
2.3 Mode Selection
The LumiSplit 2.10 has different operating modes. To change the
mode,
hold both input buttons (A and B)
together for 2 seconds.
The LEDs from both ports will start blinking blue. Then
release the
two buttons and press the desired output button
to select the
mode. Each output button represents another mode.
Step 1: hold the A + B button until the port LEDs change colour.
Step 2: Press the output button corresponding to the desired
mode. A list of the different modes can be found on the label on
the rear of the device.
BUTTON COLOUR MODE SELECTION
Output 1 Blue Splitter
Output 2 Blue Backup
Output 3 Blue HTP Merging
Output 4 Blue LTP Merging
Output 5 Blue Regeneration Zone A
Output 6 Blue Regeneration Zone B
Output 7 Blue Regeneration Zone A + B
Output 8 Green Dark Mode
Output 9 Orange User Preset 1
Output 10 Orange User Preset 2
7
2. LUMISPLIT FEATURES AND MODE SELECTION