3.7.1 Zone assignation
In the endpoint view, you can also modify the zone assignment
per port (1 or 2). Input A is universe 1, input B is universe 2. To
assign an
output to one of these zones, click on the universe number of the
selected output, and change the number, according to your need.
3.7.3 Identify a port
If needed you can identify a port. To do so, tick the corresponding
Identify check box, and the LED of the selected port will blink
white. This can come in handy when you need to indicate the port
to use.
3.7.2 RDM filtering
From this menu, you can enable / disable RDM filtering per port
and per zone as well. Tick the corresponding filter check box to
enable RDM filtering. A filtered output will display a light colour on
its LED (cyan or orange).
12
3 | THE NEW RDM EXPERIENCE /
3.7 ENDPOINT VIEW
