4.3 Lock / Unlock the Front Panel
To lock the device, right click on one of the responders and select
Lock
state
> Front Panel Locked
. To unlock the device, repeat the same
operation, and select
Lock state > unlocked
.
LumiSplit doesn’t actually use a pin code for locking the front panel,
therefor it is not required to enter a 4-digit code. Just click OK to con-
firm the lock state.
4.4 Dark Mode
The LumiSplit offers you to lower down the brightness of the LEDs.
Right click on one of the responders and select display level. Here you
can set the brightness either to low or full.
There is no intermediate value available for the brightness of the LEDs.
4.5 Mode Selection
You can remotely select one of the modes the splitter offers. Right click
on one of the responders and select the desired mode.
More details about each available mode can be found in paragraph
3.3 of this manual.
12
4 | THE NEW RDM EXPERIENCE /
4.3 LOCK / UNLOCK THE FRONT PANEL / 4.4 DARK MODE / 4.5 MODE SELECTION