3. CONNECT TO THE WEB INTERFACE
- Connect a computer to the switch with a network cable
- Default GigaCore ‘s IP address is displayed at the rear of the unit. Set your computer with an IP address within the same
subnet (do not use the same IP address!)
- Launch your favorite web browser
- Type the following IP address of the switch in the address field
- Enter
admin
in the login field. Leave the password field blank.
State
Mode LED
Port Mode LED
Description
Groups
White
Group colour
The LED colour indicates the group assignation of the port
RLinkX
Blue
Blue
Indicates a redundant port
MultiLinkX
Magenta
Magenta
MultiLinkX is enabled
White
MultiLinkX is active
PoE
Yellow
Yellow
PoE is activated on this port
Orange
Port is sourcing a device
Red
Error on PoE
Dark Mode
Off
Off
All port’s LEDs are switched off. Switch’s status LEDs remain
available. Ideal to reduce light emitted by the switch
By pressing the mode button, you can select what info to display on the ports’ LEDs.
4. RESET
Sometimes it can come in handy to reset the device. To do that,
press and hold the mode button for 10 seconds
. Once the four
LED indicator blinks red, release the button. This will reset all settings to default. User profiles will be preserved though.
