(Table 1: LED colors)
2. POWER UP THE DEVICE
Power-up the device with a power cable with Neutrik powerCON TRUE1 connection (
1
) (please contact your local dealer if you don’t have
a suitable power cable on hand). The device will automatically switch on. To shut it down after use, just un-plug the power cable again.
1 - Power In:
Power input on Neutrik powerCON TRUE1
After connecting a power cable correctly, by default the power LED indicator on the front panel will light up in
green
.
3. LED INDICATORS
Find below the signification for every switch’s LED.
Switch LED
Colour
Description
Power (General status LED)
Green
All OK
Green blink
Unit is writing to the flash. Do not disconnect power
Orange
Temperature warning
Red blink
Temperature or Fan error
Red/Green blink The unit is flashing new firmware. Do not disconnect power
PoE LED (GigaCore 10 with PoE only)
Green
Internal PoE supply OK. PoE functionality OK
Red blink
PoE supply or PoE functionality error
RLinkX LED
Green
RLinkX is active
Port LED
Status
Description
Link
Off
No link
Green
Gigabit connection
Orange
10/100 Mbps connection
Blink
Activity
1
(Illustration 3: power connection)
