background image

21

luminancebrands.com

Please contact 1-800-777-4440 for further assistance

U.L. Model No.: CF500

Luminance Brands Ceiling Fan Product Limited Warranty

What The Limited Warranty Covers:

This limited warranty is offered by Luminance Brands (“Luminance Brands” or “our” or “we” or “us”) to the original purchaser (“you” or “your”) of a consumer or industrial 

Luminance Brands ceiling fan product including its motor and the other components, and accessories of a consumer or industrial Luminance Brands ceiling fan product sold 

separately (“Luminance Brands Ceiling Fan Product(s)”) against defects in workmanship and materials, subject to the exclusions described below.
What The Limited Warranty Period Of Coverage Is:

All limited warranty periods herein begin on the date of original Luminance Brands Ceiling Fan Product purchased by You. 

This limited warranty covers the Luminance Brands consumer Ceiling Fan Product motor for the lifetime of the original purchaser’s ownership when operated in accordance 

with Your Luminance Brands Ceiling Fan Product Owner’s Manual or other instructions provided by Luminance Brands to You with the Luminance Brands consumer Ceiling Fan 

Product. 

This limited warranty covers the Luminance Brands Industrial Ceiling Fan Product motor for five years from the date of purchase of Your Luminance Brands Industrial Ceiling Fan 

Product (when operated in accordance with Your Luminance Brands Ceiling Fan Product Owner’s Manual or other instructions provided by Luminance Brands to You with the 

Luminance Brands Industrial Ceiling Fan Product).

This limited warranty covers the Luminance Brands Ceiling Fan Product LED drivers and LED arrays component or accessory LED drivers and LED arrays for a period of five (5) 

years. All other components of the Luminance Brands Ceiling Fan Product certified as ENERGY STAR® including motor electronics are covered by this limited warranty for a 

period of three (3) years. All other components and accessories of the Luminance Brands Ceiling Fan Product including motor electronics are covered by this limited warranty for 

a period of one (1) year. 
No Other Express or Implied Warranty Applies:

THE LIMITED WARRANTIES PROVIDED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES PROVIDED BY LUMINANCE BRANDS TO YOU FOR YOUR Luminance 

Brands Ceiling Fan Product, AND ARE IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, WHETHER ARISING BY OPERATION OF LAW 

OR OTHERWISE, WHETHER OR NOT THE PURPOSE HAS BEEN DISCLOSED AND WHETHER OR NOT THE Luminance Brands Ceiling Fan Product HAS BEEN SPECIFICALLY 

DESIGNED OR MANUFACTURED FOR YOUR USE OR PURPOSE. LUMINANCE BRANDS HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT 

LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
How You Can Receive Warranty Service:

You must be the original purchaser and have proof of Your purchase of Luminance Brands Ceiling Fan Product from an authorized Luminance Brands Dealer to obtain Your 

remedy under this limited warranty. You can return Your Luminance Brands Ceiling Fan Product to an authorized Luminance Brands Dealer, or You can call Luminance Brands 

Customer Service at 1-800-777-4440 to obtain a return authorization and service identification tag.  In order for Us to confirm that Your Luminance Brands Ceiling Fan Product is 

still under warranty, please retain Your receipt or other proof of purchase and have that information readily available when returning Your Luminance Brands Ceiling Fan Product 

to Your place of purchase, or upon calling Luminance Brands Customer Service. If You call Luminance Brands Customer Service, prior to Your call, please be prepared to provide 

all model numbers shown on Your Luminance Brands Ceiling Fan Product. Once We have processed your return authorization request, We will provide You with a postage paid 

return label which should be affixed to the Luminance Brands Ceiling Fan Product package You ship. The return label will be sent to the mailing address You provide to Us by 

phone.
What We Will Do To Correct Problems:

If the defect is covered by this limited warranty, Luminance Brands will repair or replace the applicable Luminance Brands Ceiling Fan Product at no charge to You. If repair of the 

Luminance Brands Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Luminance Brands Ceiling Fan Product can be provided, 

Luminance Brands will refund You the actual purchase price of Your Luminance Brands Ceiling Fan Product. We will ship the repaired or the replacement Luminance Brands 

Ceiling Fan Product to You at no charge, but You are responsible for all costs of removal and reinstallation of Your Luminance Brands Ceiling Fan Product.
What Is Not Covered under the Limited Warranty:

This limited warranty does not extend to and expressly excludes:

•  The glass globes and light bulbs of Your Luminance Brands Ceiling Fan Product,

•  Any costs or fees associated with the labor, including electrician’s fees, required to install, remove, repair or replace a fan or any fan components or accessories.

•  Loss or damage to the Luminance Brands Ceiling Fan Product motor or any Luminance Brands Ceiling Fan Product component or Luminance Brands Ceiling Fan Product 

  accessory caused by normal wear and tear, rather than due to defects in materials or workmanship,

•  Loss or damage resulting from conditions beyond our reasonable control, including without limitation, unforeseeable operating environmental conditions, repairs not made at 

  Our factory or authorized service center, use of parts or accessories not provided to You as part of this warranty by Our factory or authorized service center, mishandling, 

  unreasonable use, misuse, abuse, modifications or other damage caused by You or a third party to your Luminance Brands Ceiling Fan Product while not in Our possession,

•  Loss or damage resulting from improper installation, or other failure to comply with instructions in Your Owner’s Manual including but not limited to Luminance Brands 

  Ceiling Fan Products installed in unintended industrial or residential applications.

•  Luminance Brands Ceiling Fan Product purchases from unauthorized Luminance Brands Dealers.
This limited warranty is deemed null and void upon the occurrence of either of the following events:

•  You as the original purchaser cease to own the Luminance Brands Ceiling Fan Product, or

•  The Luminance Brands Ceiling Fan Product is moved from its original point of installation.

This limited warranty is only valid within the 50 United States, the District of Columbia, and Canada. No other written or oral warranties apply, and no employee, agent, dealer or 

other person is authorized to give any warranties on behalf of Us.
Limitation of Liability:

REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE TO YOU UNDER THIS LIMITED WARRANTY. TO THE EXTENT PERMITTED BY LAW, 

IN NO EVENT SHALL LUMINANCE BRANDS OR ANY LUMINANCE BRANDS AUTHORIZED DEALER BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL 

DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE Luminance Brands Ceiling 

Fan Product OR FOR THE NEGLIGENCE OF LUMINANCE BRANDS OR A LUMINANCE BRANDS AUTHORIZED DEALER. LUMINANCE BRANDS SHALL NOT BE LIABLE FOR 

DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, 

INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL LUMINANCE BRANDS’ OR ANY LUMINANCE BRANDS AUTHORIZED AGENT’S 

LIABILITY TO YOU OR ANY INDIVIDUAL USING THE Luminance Brands Ceiling Fan Product EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE Luminance Brands 

Ceiling Fan Product. The term “consequential damages” shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use or revenue, cost of capital 

or loss or damage to property or equipment. 
Dispute Resolution:

In the event of any dispute INCLUDING, BUT NOT LIMITED TO, BREACH OF CONTRACT, BREACH OF WARRANTY, CLAIMS BASED IN TORT, NEGLIGENCE, PRODUCT LIABILITY, 

FRAUD, MARKETING, STATE OR FEDERAL REGULATIONS, ANY CLAIMS REGARDING THE ENFORCEABILITY OF THIS LIMITED WARRANTY, AND THE WAIVER OF CLASS 

ACTION TRIALS between You and Luminance Brands, either party may choose to resolve the dispute by binding arbitration, as described below, instead of in court. THIS MEANS 

IF EITHER YOU OR LUMINANCE BRANDS CHOOSE BINDING ARBITRATION, NEITHER PARTY SHALL HAVE THE RIGHT TO LITIGATE SUCH CLAIM IN COURT OR HAVE A JURY 

TRIAL. DISCOVERY AND APPEAL RIGHTS ARE LIMITED IN BINDING ARBITRATION. You and Luminance Brands agree that the proper venue if Arbitration is not so chosen by 

You or Luminance Brands of all actions arising in connection herewith shall be only in the state of Ohio and the parties agree to such jurisdiction. 

CLASS ACTION WAIVER: BINDING ARBITRATION MUST BE ON AN INDIVIDUAL BASIS. THIS MEANS NEITHER YOU NOR LUMINANCE BRANDS MAY JOIN OR CONSOLIDATE 

CLAIMS IN ARBITRATION BY OR AGAINST OTHERS, OR LITIGATE IN COURT OR ARBITRATE ANY CLAIMS AS A REPRESENTATIVE OR MEMBER OF A CLASS OR IN A PRIVATE 

ATTORNEY GENERAL CAPACITY.

ADMINISTRATION OF ARBITRATION: The binding arbitration must be administered by the American Arbitration Association (“AAA”) in accordance with 

its Commercial Arbitration Rules and/or Supplementary Procedures for Consumer-Related Disputes (including proceedings to mitigate costs of travel). 

This binding arbitration is governed by the Federal Arbitration Act (“FAA”) (9 USC §1, et. seq.) and will govern the interpretation and enforcement. The binding 

arbitration shall be held at a location determined by AAA or at such other location as mutually agreed. In addition to the terms stated above, the following will 

apply to the binding arbitration: (1) the arbitrator, and not any federal, state, or local court or agency, will have exclusive authority to resolve any dispute relating 

to the interpretation applicability, enforceability or formation of this agreement including any claim that all or any part of this agreement is void or voidable; 

(2) the arbitrator shall apply Ohio law consistent with the FAA.
How State and Provincial Law Relates To The Warranty:

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to You. This limited 

warranty gives you specific legal rights, and You may also have other rights which vary from state to state or province to province.

Summary of Contents for CF500AP00





































































Reviews: