L U M I N S M A R T . C O M
Wiring the LSP
INSTALLATION QUESTIONS
QUESTION
ANSWER
How do I install the LSP’s
Power Cable Harness?
Install the LSP’s Power Cable Harness by connecting the LSP’s white wire
labeled “Neutral” to the existing neutral bar in the electrical panel; then
connect the black LSP wire labeled “Line A” to a breaker located on phase
A of the electrical panel; and then connect the red LSP wire labeled “Line
B” to a breaker located on phase B of the electrical panel.
The LSP wires “Line A” and “Line B” can be connected to their respective
breakers via double-tapping the breaker or via a three-way wire nut or via
a new, unpopulated breaker if needed.
How do I connect my LSP to
the circuits in my circuit
breaker panel?
Select a circuit to connect to the LSP, turn it o
ff
and disconnect the load
with a screwdriver. Then select a LSP wire labeled “Line # A” and connect it
to the now vacant circuit breaker with a wire stripper and screwdriver.
Next select the LSP wire with the corresponding line number and ending
with B (labeled “Line # B”) and connect it to the disconnected load with a
wire stripper and wire nut.
Ensure a tight connection is made between the two wires. Once the
connection between the circuit and the LSP is completed you can turn the
circuit breaker back on. Repeat these steps until all desired circuits are
connected to the LSP.
Which circuits should I
connect to my LSP?
Please refer installer to Lumin’s Circuit Selection Guide:
https://lumin.app.box.com/folder/78148559938
Or Lumin’s YouTube video:
www.youtube.com/watch?v=Q5v9833zbWo&t=1s
Is the LSP only compatible
with a certain brand/type of
circuit breaker?
The LSP is compatible with all circuit breakers rated up to 60 amps,
regardless of the manufacturer or brand.
2
