LF500-INS-LAB-RevC18 10
6 USER GUIDE
CHARGING THE BATTERY
The lift battery can be charged by plugging the charger directly into the control box while it is
attached to the lift,
Or
The battery pack can be charged in
the wall / desk charging caddy.
Info: The lift battery will be partially
charged when it is new, but your new
lift battery should be charged for 10-
12 hours before use.
Charging the Battery in the Lift
The lift battery can be charged with
the battery pack in place. Plug the
charging cable into the side of the
control box (the control box holds the
battery pack and PC board).
Info: Place the red button on top of the control box in the UP position while charging.
• When the battery indicator shows a full black bar and the pendant shows 3 green
nonflashing lights, battery is fully charged.
• When the pendant shows 2 green flashing lights, battery will take 14 hours to fully recharge.
• When the pendant shows 1 green flashing light, battery will take 18 hours to fully recharge.
• When the pendant shows 1 orange flashing light, battery will take 20 hours to fully recharge.
• When the battery is fully charged, the pendant lights will stop flashing.
Info: When the battery is fully charged, place the red button on top of the control box in the
DOWN position to prevent the battery from draining.
Charging the Battery in the Caddy
The battery can also be charged in the wall / desk charging caddy. Squeeze the lever to release
the battery pack and seat it in the caddy. Plug the charger into the side of the caddy.
• If you are charging in the caddy, when the charger is plugged in, the caddy light will be green.
• The charger light will be green if the battery is more than 80% charged.
• The charger light will be orange if the battery is less than 80% charged.
The LF500 comes with a spare battery pack. For convenience, keep the spare battery fully
charged.
Wall / desk
charging caddy
Extra battery
pack
Control box
