Lumex FR566DG, Assembly And Operating Instructions Manual

Page: 14 / 24

FR566DG-INS-LAB-RevF16 14
LUMEX CLINICAL CARE RECLINERS WITH HEAT AND
MASSAGE FEATURE
INSTALLATION AND OPERATING GUIDE
Series FR566GH and FR566DGH
Tools Required:
1
/
4
” Hex Wrench,
3
/
8
” Hex Wrench, Phillips Screwdriver, masking or packaging tape
WARNING: Important! Read and understand these instructions before assembling
or using the Specialty Healthcare Seating Heat and Massage Unit. If you do
not understand any part of these warnings, cautions or instructions, contact a
healthcare professional for direction in the use of this product. If the Heat and
Massage Unit is not properly assembled, personal injury and damage to the Heat and
Massage Unit could result.
WARNING: The recliner seat and back heating elements are wired to operate in
series only. Do not change the system wiring in any way.
WARNING: If components are damaged or missing, contact your Graham-Field
authorized distributor immediately. DO NOT use substitute parts. Use only Lumex
replacement parts. The use of non-Lumex replacement parts could cause personal
injury, property damage, and void the warranty.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or
injury caused by improper assembly or use of this product.
Description
The Lumex Specialty Healthcare Seating Heat and Massage Unit is a low-voltage (12V)
Heat and Massage Unit, controllable by the user and / or caregiver, designed to enhance
the comfort of the patient / resident during the use of Lumex Clinical Care Recliners. The
Heat and Massage Unit offers three levels of seat and back heat, as well as a gentle or firm
massage function for just lower back or both lower and upper back.