English -
41
Chapter 11 Troubleshooting
This chapter describes problems you may encounter while using PS660. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
Issues
Solutions
1
Boot without
power
Make sure you have plugged in the power cord.
2
No image output
from the PS660
1. Check the power.
2. Check the connection, Refer to
PS660 User Manual
Chapter 4 Installation and Connections
3.
Check the [Source], refer to
PS660 User Manual
Chapter 8 Descriptions of major functions 8.1 I
would like to switch image sources
.
4.
Check the settings for the source of the projector. For
the appropriate input selection of the projector, refer to
the projectors user manual.
5. Check if DIP Switch is properly set. Refer to
PS660 User
Manual Chapter 6 DIP Switch Settings
for related
settings.
3
Unable to focus
Probably the document is too close. Press [Zoom -] on the
remote control or control panel
. Or pull away the
distance between document and lens, then press [AF].
4
The image is
incomplete
Check the Auto Image setting of your projector. Please refer
to the user manual of the projector.
5
Forget the
password for
turning on
Please contact your distributor or the service center.
6
Visual Presenter
V2, Ladibug
™
or
other application
cannot be
executed
simultaneously
Visual Presenter V2,
Ladibug
™
and other applications
cannot be executed simultaneously. Only one application
can be executed at a time. Please close the currently
running applications and then execute the application to be
used.
