7 CAPELLA COURT, OTTAWA, ON K2E 8A7, CANADA | TEL (613) 736-4077 | FAX (613) 736-4071 | WWW.LUMENERA.COM | [email protected]
© 2017 Lumenera Corporation. All rights reserved.
Design, features, and specifications are subject to change without notice
10
09282017
WWW.LUMENERA.COM
Lumenera Camera User's Manual
Release 6.8.1
Figure 7: Windows Security
Select “
Always trust …”
option and clicking on Install to continue.
Figure 8: Last step of the USB installation
Clicking
Finish
.
After the software has been installed, plug the USB 2.0 or USB 3.0 camera into a free USB 2.0 or USB 3.0 high-speed
port.
Note:
The first time a USB camera is connected to any USB port on the computer, the user must be logged into an
account with Administrator rights. Once the PC recognizes a camera in a specific port, the camera can be disconnected
and reconnected by a user with non-administrator privileges.
Before the camera becomes operational, the operating system must load the device drivers. The LED on the camera will
not illuminate until the camera drivers have been successfully loaded to the camera.
