A
2A
1. Safety Instruction
WARNING
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems
.
Unpack and check carefully that there is no transportation damage before using the unit.
The unit is for indoor use only. Use only in a dry location.
Only to be installed and operate by qualified persons.
Do not allow children to operate the fixture.
Use a safety wire when installing the unit. Only carry the unit by its base and not the head.
The unit must be installed in a location with adequate ventilation.
Make sure that no ventilation slots are blocked otherwise the unit will overheat.
Before operating, ensure that the voltage and frequency of the power supply matches the
power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Maximum ambient temperature TA: 40 . Don’t operate it when the temperature is higher
than this.
Do not connect the fixture to dimmer packs.
Make sure there are no flammable materials close to the fixture while operating as they may
be a fire hazard.
Examine power cables carefully; replace them immediately if there is any damage.
The fixtures surface temperature may reach up to 85 . Do not touch the housing during its
operation, and allow 15 minutes for cooling the unit down before replacing the lamp or
starting maintenance.
Do not operate in dirty or dusty environments; clean the fixture regularly.
Do not touch any power cables during operation as there is the risk of electric shock.
Please read the instruction manual carefully as it includes important
information about installation, usage and maintenance.
