NA6Plus-09
User’s Manual
9
___________________________________
cancel key
–
entering the menu of registered results
–
entering the parameter preview menu (hold for about 3 seconds)
–
exit from the preview menu or programming matrix
–
resignation from the parameter change
Pressing and holding the
key for about 3 seconds causes entering the programming mode.
The programming mode is secured with the
security code.
Pressing and holding the
key for about 3 seconds causes entering the menu of the preview
and the menu of recorded values. Navigating the preview menu is done using the
key.
In this menu, all programmable parameters of the meter are available for read-out, with the
exception of service parameters. The exit from the preview menu is done by means of the
key.
An overview of the recorded values is possible after pressing the
key on the
parameter in the preview menu. The recorded result number is displayed alternately
with the value e.g.
/
. Navigating the recorded values is done using the
key.
Holding this key for longer than about 2 seconds will speed up the browsing. Pressing the
key at any time will display the number of recorded results. The exit from the viewing recorded
values is done by pressing the
key.
Rys. 7 The NA6Plus meter operation algorithm
navigating
through the
preview
password
entry mode
seC
3 s
Correct
password
programming
matrix
yes
no
display of the
inscription
err
Matrix
navigation
- entrance to the selected level
- entry to parameter changes
- exit from the programming
matrix
resetting of alarm
outputs
Measurement
3 s
Preview
menu
Displaying the minimum
value
CH1
Displaying the maximum
value
CH1
Displaying the minimum
value
CH2
Displaying the maximum
value
CH2
preview recorded
values
3 s
Navigation
around next
values