NA6Plus-09
22
User’s Manual
–
when the individual characteristics for the analogue output is switched on, the displayed value
is linearly transformed according to the entered d_H1, d_H2 and O_Y1, O_Y2 parameters.
–
the meter regularly controls the values of the entered parameter. If the entered value exceeds
the upper or lower range of changes, the meter will not record the parameter.
–
if the input type is changed, the decimal point is changed at the same time, optimally for the
given input.
–
after a power failure, the current time is reset.
–
recording is switched off when:
•
it was disabled from the meter menu level
•
the input type was changed
•
the recording start time was changed
•
the recording interval was changed
•
setting the averaging time for the Cnt measurement to 0
•
memory full
•
power on the meter
–
on the bar graph working in
or
mode, it is possible to set only one alarm marjers
and
(from one alarm). Setting markers for the selected alarm activates them on the
bar graph and automatically disables the markers from other alarms assigned to the same
measurement channel.
–
the max and min values are erased in case of change of
•
Input type
•
individual characteristics (on, off)
•
restoring factory parameters
Parameter description
Factory parameter
Parameter description
Factory parameter
rG
.
)0
0
)0
)0
)0
!0
)0
)0
11%2
)0
)0
...
...
)0
00.00
)0
-1999