Lumberjack SCMS254SB, Safety And Operating Manual

Page: 16 / 24

AIR6V 01 AIR6V 01 AIR6V 01 AIR6V 01
SCMS254SB 14
MAINTENANCE AND SERVICE
Maintenance and Service
Maintenance and Cleaning
Before any work on the dust collector itself, pull
the mains plug.
For safe and proper working, always keep the
dust collector and ventilation slots clean.
If the replacement of the supply cord is
necessary, this has to be done by an authorized
service agent in order to avoid a safety hazard.
If the dust collector should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised
service centre.
1. Store the tool, instruction manual and
accessories in a secure place. In this way you will
always have all the information and parts on
hand.
2. Keep the tool’s air vents unclogged and clean
at all times.
3. Remove dust and dirt regularly. Cleaning is
best done with compressed air or a rag.
4. Never use caustic agents to clean plastic
parts.
General inspection
1. Regularly check that all the fixing screws are
tight. They may vibrate loose over time.
SERVICE
1.Tool service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of
electric shock or injury.