AIR6V 01
AIR6V 01
AIR6V 01
AIR6V 01
SCMS254DB 09
ASSEMBLY INSTRUCTIONS
Assembly
Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be
connected to the mains supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the machine
and the accessories provided.
Before starting the operation of the machine for
the first time, check if all parts listed in the box
content section have been supplied
Note:
Check the power tool for possible damage.
Before further use of the machine, check that all
protective devices are fully functional. Any
lightly damaged parts must be carefully checked
to ensure flawless operation of the tool. All parts
must be properly mounted and all conditions
fulfilled that ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Always tighten the locking knob (7)&(23) firmly
before sawing.
Otherwise the saw blade can
become wedged in the workpiece.
Stationary or Flexible Mounting
To ensure safe handling, the machine must be
mounted on a level and stable surface (e. g.,
workbench) prior to using.
Mounting to a Working Surface
– Fasten the power tool with suitable screw
fasteners to the working surface. The mounting
holes (
10
)serve for this purpose.
or
– Clamp the power tool with commercially
available screw clamps by the feet to the working
surface.
Mounting to a Saw Stand
Any universal saw stand which will accept
mounting holes 450mm wide by 340mm in length
will suffice.
Read all safety warnings and instructions
included with the worktable.
Failure of observing
safety warnings and instructions can lead to
electrical shock, fire and/or cause serious injuries.
Assemble the worktable properly before
mounting the power tool.
Perfect assembly is
important in order to prevent the risk of
collapsing.
– Mount the power tool in transport position on
the saw stand.
