Lumberjack EP82-3, Safety And Operating Manual

Page: 9 / 18

EP82-3 07
- Ensure the workpiece is securely
clamped.
- To switch the tool ON, press the lock-
off button fully and pull the ON/OFF
switch.
- To switch the tool OFF, release the
ON/OFF switch.
- Set the planing depth by turning the
adjustment knob until the desired
planing depth is reached.
- The planing depth can be read from the
scale around the knob.
- Hold the machine with both hands
using both grips. This ensures optimum
control over the machine.
- Ensure the cutters have reached full
speed before they touch the workpiece.
- Guide the machine at constant speed
across the material to be worked. Do
not move too quickly, allow the
machine enough time to plane the
workpiece.
- For large surfaces it is recommended to
make several shallow cuts at a smaller
planing depth.
Operation
- Remove the machine completely from
the workpiece after use before
switching off the plane.
- Lay the machine on its side when
placing down.
Rebating
Rebates may be produced using the
rebate fence in conjunction with the
depth gauge. The maximum rebate
depth is 20mm.
Attach the depth gauge to the machine
in the manner shown below, using the
securing knob provided.