Lumberjack EP82-3, Safety And Operating Manual

Page: 8 / 18

EP82-3 06
Assembly Instructions
Assembly
Avoid Unintentional starting of the machine. During
assembly and for all work on the machine, the
power plug must not be connected to the mains
supply.
Carefully remove all parts included in the delivery
from their packaging.
Remove all packaging material from the machine and
the accessories provided.
Before starting the operation of the machine for the
first time, check if all parts listed in the box content
section have been supplied.
Note: Check the power tool for possible damage
before further use of the machine. Check that all
protective devices are fully functional. Any lightly
damaged parts must be carefully checked to ensure
flawless operation of the tool. All parts must be
properly mounted and all conditions fulfilled that
ensure faultless operation.
Damaged protective Devices and parts must be
immediately replaced by an authorised service centre.
Dust Bag / Dust Extraction
The Machine is able to accept a dust collection hose /
bag from either the left hand or right hand side of the
machine.
Make sure that the port is fitted correctly and
securely before fitting the dust bad / hose.
Simply push on the dust bag / hose firmly onto the
port.
Parallel Guide
Attach the parallel Guide (If needed) to the machine
as shown below.