Lumberjack BTS210, Safety And Operating Manual, Page: 13 / 23

BTS210 11
Maintenance and Service
Before any work on the machine itself,
pull the mains plug.
If the machine should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried out by an
approve service centre.
– Store the tool, instruction manual and
accessories in a secure place. In this way you
will always have all the information and parts
on hand.
Calibrating the Angle Finder for the
Saw Blade
– Raise the blade to its highest setting.
– Using a set square (or similar device) set the
angle of the saw blade to be at right angles to
the saw table.
– Adjust Angle Pointer (
21
) to zero.
Changing the Blade
– Loosen the four screws (
21
) and flip the saw
blade cover up.
– Place the spanner (
22
) on the clamping nut
whilst holding the sidewinder key (
23
) against it
– Loosen this nut and remove the flange to
detach the saw blade. This needs to be pulled
diagonally downwards to clear the access port.
– Clean both flanges before mounting a new
blade.
– Repeat step above in reverse order to mount
the new blade.