Lumberjack BTS210, Safety And Operating Manual, Page: 11 / 23

– You can now use stop bar (
20
) to guide the
work piece through an angled cut.
Setting the Table Extension
– For wide work piece the table extension
should be used
– Loosen the knurled screws underneath the
extension.
– Pull out the table extension and unfold the
support legs.
– Adjust the feet to set the extension table flat
– Retighten the knurled knobs to lock the
extension in place
Setting the Longitudinal Stop (20)
The stop has two different guide surfaces
which are set up like this:
– For thick materials
– For thin materials
Operation
Adjusting the Cutting Height
– The saw blade can be adjusted to the required
height by turning the height adjustment handle
(
11
)
– Rotate anti‐clockwise to raise the blade, and
clockwise to lower the blade.
Adjusting the Blade Angle
– Loosen locking handle ( 14 ).
BTS210 09
ASSEMBLY & OPERATION