BM16 04
GENERAL POWER TOOL SAFETY WARNINGS
s)
THE USE
of attachments and accessories not
recommended by Delta may result in the risk of
injuries.
t)
TURN THE MACHINE
“
OFF
”
AND DISCONNECT
THE MACHINE
from the power source before
installing or removing accessories, before adjusting
or changing set-ups, or when making repairs.
u)
TURN THE MACHINE
“
OFF
”
, disconnect the
machine from the power source, and clean the
table/work area before leaving the machine. LOCK
THE SWITCH IN THE
“
OFF
”
POSITION to prevent
unauthorized use.
9. Using an Extension Cable
.
a) If an extension cable is required, use an
approved triple core extension cable suitable for
the power input of the tool.
b) Grounded tools always require a three wire
extension cable.
c) As the distance from the supply outlet
increases you must use a heavier gauge
extension cable. Using extension cables with
inadequately sized wire causes a serious drop in
voltage, resulting in loss of power and possible
tool damage.
d) The smaller the gauge number of the wire the
greater the capacity of the cord.
e) When using a cable reel, always unwind the
cable completely.
