4
LumaPro Operating Instructions
33H471
30W LED Wall Pack
Wiring Diagrams
AC wiring instructions:
Disconnect the power by turning off the circuit breaker or by
removing the appropriate fuse at the fuse box. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
1.
Feed wires through wire way and secure using connector (not supplied).
2.
Connect supply wires to quick connect originating from INPUT side of driver.
Black/Hot supply to quick connect with black wire. White/Neutral supply to quick
connect with white wire. Be sure to confirm connections are secure.
3.
Connect ground wire to quick connect with green wire. Be sure to confirm
grounding connection is secure.
Installation
Disconnect the power before installing or serving.
1.
Reattach fixture front to fixture rear housing.
2. Connect driver OUTPUT leads to quick connect originating from LED array.
Red output to quick connect with red wires, black output to quick connect with black
wires.
3.
Reattach fixture using two Philips head screws removed in mounting step 2.
Warranty
LIMITED FIVE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within FIVE
YEAR from the date of purchase, return it to the place of purchase and it will be replaced, free of
charge. Incidental or consequential damages are excluded from this warranty.
