Lumagen RadianceXD, Manual

Page: 20 / 40

Section 4 - Audio
RadianceXD Rev 1.0 15
Audio Example 3
Output 1 drives a 1080p60 HDMI projector without audio capability, and output 2 drives an HDMI amp. In
addition, the amp’s HDMI output drives a 720p (max) LCD TV. When watching the projector (1080p60),
Output 2 should have audio only since the TV cannot accept 1080p60. When you watch TV you would
select 720p video output, and turn on the video output on HDMI Output 2. One option is to set MEMA to
output 1080p (and disable output 2 video), and MEMB to output 720p on both outputs. Audio can be set as:
Audio Source Selection Defaults
The video inputs are linked to the following audio sources by default.
Input Number Video Input Type Audio source
1 HDMI HDMI1
2 HDMI HDMI2
3 HDMI HDMI3
4 HDMI HDMI4
5 HDMI HDMI5
6 HDMI HDMI6
7 Component TOS1
8 Component COAX1
9 Component COAX2
10 Component COAX3
11 S-Video TOS2
12 S-Video COAX4
13 S-Video COAX5
14 S-Video COAX6
15 Composite STEREO1
16 Composite STEREO2
17 Composite STEREO3
18 Composite STEREO4
To change the audio source for a particular input, first select that video input, and then select the
desired audio source. More than one video input can be linked to the same audio source.
The
command is:
MENU
→
Input
→
Audio Setup
→
Source
→
(select audio input)
→
OK