Lumagen Radiance 2123, Owner'S Manual

Page: 5 / 46

LEGAL NOTICES:
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL LUMAGEN, ITS SUPPLIERS, OR
ITS DEALERS, BE HELD LIABLE FOR INJURY TO PERSONS OR PROPERTY, ANY LOST REVENUE,
LOST PROFIT, SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENCIAL, OR PUNITIVE DAMAGES,
IMPAIRMENT OF OR DAMAGE TO OTHER GOODS, HOWEVER CAUSED REGARDLESS OF THE
THEORY OF LIABILITY, RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS PRODUCT,
EVEN IF LUMAGEN, ITS SUPPLIERS, OR ITS DEALERS, HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
LUMAGEN SHALL NOT BE LIABLE FOR OMISSIONS OR ERRORS IN ITS DOCUMENTATION OR
SOFTWARE. LUMAGEN RESERVES THE RIGHT TO MAKE CHANGES TO ITS PRODUCTS AND
DOCUMENTATION WITHOUT NOTICE.
DarbeeVision Inc. - End User License Agreement (E.U.L.A) for DARBEE Visual Presence™
Technology in Lumagen Radiance Products: This product provides the ability to turn off
DARBEE Visual Presence (DVP™) processing, because the DVP technology processing feature in
this product is not intended for commercial broadcast or theatrical presentation applications.
By using this product, you accept that the DVP technology ingredient is intended for personal
or small network use and should be switched off if this video processor system is used to
process video for commercial broadcast or commercial theatrical viewing applications. You
may not record the DVP processed output of this video processor system. You may use DVP in
this product to process video for up to six end user displays, within any video system
application, provided the DVP processed output video of this system is not being sold to an end
viewer or user. An additional commercial license is available from DarbeeVision, Inc. for larger
video network, distribution, commercial applications. You may not reverse engineer or
otherwise deconstruct the DVP algorithm, which is the sole intellectual property of
DarbeeVision, Inc., and protected by patents and trade secrets. This E.U.L.A. is not intended to
limit the use of this product or its features, when the video processor is used with DVP off.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC rules, Canadian ICES-003, and CISPR 22. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Unauthorized modifications to this equipment may void Lumagen’s limited warranty and the user’s authority
to operate this equipment.
Lumagen is a registered trademark of Lumagen, Inc. Radiance, Vision, and other Lumagen product names,
are trademarks of Lumagen, Inc. Darbee™ and DarbeeVision™ are trademarks of DarbeeVision Inc. Other
trademarks are the property of their respective owners.
WARNINGS:
• Do not defeat the safety features of the power supply or power cord, such as, but not
limited to, removing the ground pin connection.
• Do not open, insert objects into, or spill liquid into, this equipment.
•
Do not block the cooling vents, and make sure there is adequate cooling around unit.
•
Do not program an output resolution that exceeds the maximum specified refresh rate
of the attached television, or projector.
• Improperly set gray-bar intensity may accelerate screen burn-in. Consult a home-
theater specialist for help setting gray-bar intensity.