Part III: Operating the Wood Chipper
10
Stopping
1.
Move the Throttle Lever to IDLE.
2.
Recoil Start: Turn the Ignition Switch to the OFF position.
3.
Electric Start: Turn the Key to the OFF position.
Operator Zone
Wood Chipping
NOTICE
Woods
’
and branches
’
diameter should be no bigger than 120mm.
WARNING
Do not place your hands into the chute when loading. This is a very UNSAFE method and
could result in injury to your hands.
Do not reach or step across the rail while the Wood Chipper is running. This is a very
UNSAFE method which could cause personal injury, even death.
When Blocked
If the Roller stops while chipping woods or branches, the engine should be stopped, and take
out the woods which stuck the roller, and then restart the engine, and chip again.
