8
Luma 600 Camera Manual
Main Menu Items
Most camera functions can be handled through the DVR’s control interface, however, you can access the camera’s
internal menu directly for specific functions. To access this menu, first set the camera to the
HIK-C (Coaxitron)
protocol. To do so from the DVR’s local interface, go to
Settings > Camera > PTZ
, then click the
PTZ Settings
button. From the web interface, go to
Configure the Recorder > Camera Settings > PTZ Settings
.
Once the protocol has been set, you can access the camera menu from the live page. Click the PTZ ( ) icon,
then click the menu ( ) button in the configuration bar of the PTZ control panel. The camera’s internal menu
shows up on screen. Throughout the menus, the up and down arrows move among the menu choices, and the left
and right arrows switch between options for that choice. The
8
symbol indicates that pressing
Iris+
opens a
submenu in which you can set parameters for that menu item.
To exit the menu system, go to
Setup > Exit
. From deep within the menu, you can click the right arrow while
Return is selected; then, when you press
Iris+
, the menu closes instead of sending you back one level. The menu
also closes after a few minutes of inactivity.
Video Out
Use the arrows to send the video signal in PAL or NTSC format.
Language
Use the arrows to select from English, French, Spanish, and many other languages. Click
Iris+
to switch all menu
items to that language immediately.
Setup
Press
Iris+
to open the submenu that controls the camera’s operations.
