LulzBot TAZ 4 User Manual Download Page 96

Page: 96 / 133

Slic3r

2.10 Slic3r Support

Slic3r Support

A variety of resources are available to provide support for Slic3r.

Wiki and FAQ

The wiki provides up-to-date documentation, and a FAQ sub-
section which may help resolve any queries or issues.

•

https://github.com/alexrj/Slic3r/wiki/Documentation

•

https://github.com/alexrj/Slic3r/wiki/FAQ

Blog

The Slic3r blog contains tips, hints, and advice.

•

http://slic3r.org/blog

IRC

Found on the

irc.freenode.net

server, the following chat

rooms are often ﬁlled with people who can provide real-time
help:

•

#reprap

: Highly active community of the RepRap project

with many users of Slic3r.

•

#slic3r

: Slic3r chat room where Slic3r developers and

users can provide help.

RepRap.org Forum

The RepRap forums contain a dedicated forum for Slic3r.

•

forums.reprap.org/list.php?263

PROOF

Summary of Contents for TAZ 4






































































































































Search results

Summary of Contents for TAZ 4

Reviews:

Brands by name

Popular brands

LulzBot TAZ 4, User Manual

Search results

Summary of Contents for TAZ 4

Reviews:

Brands by name

Popular brands