LulzBot TAZ 4 User Manual Download Page 27

Page: 27 / 133

2.2. GETTING SLIC3R

2.2

Getting Slic3r

Slic3r is Free Software, and is licensed under the GNU Aﬀero General Public
License, version 3.

Downloading

From LulzBot

The Slic3r version that has been tested for the TAZ printer
can

downloaded

from

the

LulzBot.com

downloads

page:

https://www.lulzbot.com/support/downloads

Pre-compiled packages are available for Windows, Mac OS X and Linux.

Windows and Linux users can choose between 32 and 64 bit versions to
match their system.

Slic3r

Slic3r can be downloaded directly from:

http://slic3r.org/download

Pre-compiled packages are available for Windows, Mac OS X and Linux.

Windows and Linux users can choose between 32 and 64 bit versions to
match their system.

Manual

The latest version of full Slic3r manual, with L

TEX source code, can be

found at:

https://github.com/alexrj/Slic3r-Manual

Source

The source code is available via GitHub:

https://github.com/alexrj/Slic3r

For more details on building from source see §2.2 below.

Installing

Linux

Extract the archive to a folder of your choosing. Either:

PROOF

Summary of Contents for TAZ 4






































































































































Search results

Summary of Contents for TAZ 4

Reviews:

Brands by name

Popular brands

LulzBot TAZ 4, User Manual

Search results

Summary of Contents for TAZ 4

Reviews:

Brands by name

Popular brands