Model 2363
Technical Manual
Section 7
Ludlum Measurements, Inc.
Page 7-11
January 2015
Options
Two1/2
-Second Counts—displays current readings every
two 1/2
second
s
in
the grid. In
the two-second this
mode, the readings are the actual counts from
the Model 2363. No averaging is preformed.
60-Second Counts—Allows the user to determine the count time from 2 to
9999 seconds. The reading logged is the average of the two second counts
received during the count time. For example, if the count time is 10 seconds,
the readings displayed in the grid would be the average of the
five 20 two1/2
-
second readings. If at any time you change the count time in the textbox, it
will not take effect until the current count time is finished. It will then start the
new count time.
Note:
A "0" or "1" will not be allowed in this text box.
[
Turn ON
] [
Turn OFF
]—Toggle from ON-OFF to start or stop the Auto
Data Dump.
[
Clear
]—clears data from the grid
Note:
This does NOT clear memory in the Model 2363.
[
Save Log Data
]—displays the save file prompt to allow the user to specify
which drive and directory to save the log file
[
Print]
—Sends data, including the displayed readings, to the default printer.
If there is no data displayed, only the header information will be printed.
[
Close
]—Return to main menu area.
2363 Interface Software ASCII Files and Printout
Table 1
: logged data downloaded from the Model 2363 and saved
to an ASCII file
Table 2
: real-time logged data saved to an ASCII file
Table 3
: printout of header and log data information
